Three60 DETAILS
Three60 is a completely sanitary disposable method of removing a sample from a closed system. There are no parts which must be disassembled, cleaned, and reassembled. The entire set can be applied to your fluid holding vessel or transfer line, used, and discarded.
Three60 is simply compatible with either a NA port or an 1 1/2" - laddish size sanitary connector. There is no longer a need to have specific hardware or expensive porting machined to your vessel.
Disconnecting your sample from the device is equally simple. Advanced Scientifics has developed a disposable disconnect which makes a "cut and seal" action. This disconnect accomplishes this without the use of secondary tools. Only the operator's hands are needed to safely remove the sample from the device.
Advanced Scientifics manufactures devices in class 10k clean rooms under the scrutiny of a quality system approved by ISO 13485 and the FDA. Advanced Scientifics also performs a 100% inspection on all parts leaving the facility.
FEATURES
Valve body - Eight alternating on and off positions.
Pinch & Cut - Anvil closes on tubing and terminates fluid path
Injection Port - Leur lock injection site. Extract through septum or twist-off leur for pour.
Tubing - Co extruded C-Flex R70-374 tubing.
Bag - Polyethylene bag for sample retention
1 1/2" Sanitary Connector
4mp0034: Four 50ml Polyethylene sample bags complete with C-flex tubing, pinch and cut devices, male luer injection sites and 1 ½” sanitary sampling system valve.
4mp0035: Four 100ml Polyethylene sample bags complete with C-flex tubing, pinch and cut devices, male luer injection sites and 1 ½” sanitary sampling system valve.
4mp0036: Four 250ml Polyethylene sample bags complete with C-flex tubing, pinch and cut devices, male luer injection sites and 1 ½” sanitary sampling system valve.
4mp0037: Four 500ml Polyethylene sample bags complete with C-flex tubing, pinch and cut devices, male luer injection sites and 1 ½” sanitary sampling system valve.